AT&T SYSTEM 25 User Manual page 31

2. To place an outgoing call immediately, press an idle
<LOOP> button and complete the call.
3. If you do not want to make another call now, hang up;
incoming calls can ring at other <LOOP> buttons.
Returning to the Held Call While Still Off-Hook
1. Press the <LOOP> button next to the winking green
light.
2. Continue your conversation.
Returning to the Held Call After Hanging Up
1. If the red l-use light is on at the same button where
the green light is winking, simply lift the handset.
• The green light changes to steady.
• You are connected to the held party again.
2. If the red l-use light is on somewhere else, press the
<LOOP> button next to the winking green light and
lift the handset.
• The green light turns on.
• You are connected to the held party again
Typical Display for a Call on Hold:
The display screen goes blank (except for number of calls in
the queue) after a call has been put on hold.
2
Continued
Hold (Contd)
27