AT&T SYSTEM 25 User Manual page 42

Placing Calls (Contd)
• Dial tone is supplied.
3. Continue to place the call in the normal way.
Placing an Outside Call for an Inside Party and Calling the
P a r t y B a c k W h e n t h e C o n n e c t i o n i s R e a d y
1. Place the outside trunk call in the normal way.
2. When the called outside party answers, announce the
call and then press <START> to split the call (put it
on temporary hold).
• New dial tone is supplied on the same <LOOP>
button.
3. Place a call to the inside party who requested the call.
4. Press <RELEASE> to connect the two parties and
remove the call from the console. (If your console has
the Auto Release feature, hanging up or pressing a
new <LOOP> button has the same result. )
You are now free to handle other calls.
Typical Display for an Inside Call:
The display shows the PDC and name of the called party.
The digit 3 indicates that three calls are waiting in the queue
to be answered.
3 8
2187 Davis,R
Continued
3