Position Busy - AT&T SYSTEM 25 User Manual

Position Busy

If your system has two attendant consoles, you can make
your position busy to most incoming calls and have them
directed to the other console. Only one console can be
placed in Position Busy mode at a time.
In a one-console configuration, you can activate Position
Busy only if some voice terminal has been specifically
administered as a backup answering position.
Activating Position Busy
1. Press <POS BUSY>.
• The light next to this button turns on.
• Calls to your PDC can still come into the
console, and outgoing calls can be placed.
Deactivating Position Busy
1. Press <POS BUSY>.
• The light next to this button turns off.
Display: Activating and deactivating Position Busy does not
affect the current display.
40