Making Chorus Settings; Setting Procedure; Functions Of Parameters - Roland XV-88 Owner's Manual

Chapter 7. Adding Effects

Making Chorus Settings

You can make the settings for Chorus used by Patches/
Rhythm Sets/Performances.

Setting Procedure

1. After confirming that you are in Patch/Rhythm Set/
Performance mode, select the desired Patch/Rhythm
Set/Performance (p. 29, p. 35, p. 39).
2. Press [EDIT], getting the indicator to light, and then
press the [EFFECTS] function button.
3. Press
or to display the desired Edit page.
4. Press
or to move the cursor to the parameter
you're going to modify.
5. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric
keys to change the parameter value.
6. When you finish making settings, press [EXIT] to return
to the previous PLAY page.
An asterisk * will be displayed at the left of the Patch/
Rhythm Set/Performance group. This indicates that the
Patch/Rhythm Set/Performance settings have been
modified.
If you select another Patch/Rhythm Set/Performance in
the group with an asterisk *, the modified Patch/
Rhythm Set/Performance settings will be lost. To keep
these modified settings, perform the save operation (p.
164).
156

Functions of Parameters

The functions of Chorus parameters are explained according
to the display arrangement.
CHO TYPE
fig.07-12
Type (Chorus Type)
Selects either Chorus or Delay.
OFF: Neither Chorus or Delay is used.
CHORUS: Chorus is used.
DELAY: Delay is used.
Source (Chorus Source)
Selects the Chorus parameter settings that will be used by the
Performance. If you wish to use the Performance settings,
select PERFORM. If you wish to use the settings of the
Patch/Rhythm Set assigned to one of the Parts, select the
Part number.
If you have selected the Part number here, the Part
number will be displayed in the upper left of the CHO
parameter setting display of Performances.
fig.07-13
This parameter is not available when a Patch or Rhythm
Set is being selected.
When Patch or Rhythm Set Settings Are
Selected
When the Patch or Rhythm Set's Chorus settings are
selected, those settings are shown in each of the
Performance's CHO settings pages, and the settings can
be then be changed as well. Changes to Patch or Rhythm
Set Chorus parameter settings are lost when another
Patch or Rhythm Set is selected. To keep the modified
settings, save the Patch/Rhythm Set settings (p. 164).