Making Settings While Comparing Tones (Palette Edit) - Roland XV-88 Owner's Manual

If you've made a mistake in setting a parameter value, or
you have second thoughts about the changes, press
[UNDO/COMPARE] to restore the value to what it was.
8. If you wish to move to another display group, press
[EDIT] to make the indicator light, and use the function
buttons.
You can also move to another display group by holding
down [SHIFT] and using
done even when the [EDIT] indicator is dark, it is a faster
way to get around because you don't have to turn on the
[EDIT] indicator each time.
9. Repeat steps 3–8 to complete a Patch.
10. When you finish making settings, press [EXIT] or
[PATCH] to return to the PATCH PLAY page.
An asterisk * will be displayed at the left of the Patch
group. This shows patch settings have been modified.
If you select another Patch in the group with an asterisk
*, the modified Patch settings will be lost. To keep these
modified settings, perform the save operation (p. 164).
fig.05-03
or . Since this can be
Chapter 5. Creating Patches
Making Settings While
Comparing Tones (Palette Edit)
When modifying Tone settings for a Patch, the values for
four Tones will be displayed together on a single display.
This is called the Palette page. Use it when you want to
modify parameter values as you compare the settings of the
four Tones.
1. When modifying a Tone, use
cursor to the parameter you wish to modify.
2. Press [PALETTE EDIT] to call up the Palette page.
fig.05-04
3. Press TONE SELECT [1]–[4],
Tone to modify.
The button indicator for the selected Tone will light, and
the Tone number and Wave name appear in the display.
For modifying the same parameter of two or more Tones
simultaneously, hold down one of the TONE SELECT
[1]–[4] buttons and press another.
4. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric
keys to change the parameter value.
If you've selected two or more Tones, your editing will
modify the parameter values for all selected Tones by the
same amount. If you want to set all selected Tones to the
same value, select the Tone having that value by
pressing or , and while holding down [SHIFT],
press [ENTER].
If you've made a mistake in setting a parameter value, or
you have second thoughts about the changes, press
[UNDO/COMPARE] to restore the value to what it was.
5. If you wish to edit other parameters,
press or to select the parameter that you wish
to edit.
6. Repeat steps 3–5 to complete a Patch.
7. To exit the Palette page, press [PALETTE EDIT], thus
extinguishing the button's indicator.
or to move the
or to choose the
67