Storing Sound Data In User Memory (Write); Saving A Performance - Roland XV-88 Owner's Manual

Chapter 10. Memory Settings (Utility Mode)
3. Use
or to select the desired function (the function
name will blink), and press [ENTER].
The display for the desired function will appear.
• You can also access the desired function page by using
the numeric keys or function buttons to specify the
number of the function.
• If you selected the UTIL 2 group function "1. CARD,"
the CARD page will appear. Here you can once again
select the desired function.
4. When parameters in the different function page are to be
set, you can use the VALUE dial, [INC/+]/[DEC/-], or
the numeric keys to make the settings.
To cancel the operation, press [EXIT].
5. Press [ENTER] to execute the function.
When the operation is completed, the display will briefly
indicate "COMPLETED."
When certain functions are executed, you are then
returned to the original mode page.
6. To return to the UTIL 1 or UTIL 2 page, press [EXIT]. To
return to the display of the previous mode, press
[UTILITY] to make the indicator go dark.
180
Storing Sound Data in User
Memory (WRITE)
If you turn the power off or select another Performance,
Patch, or Rhythm Set after you have modified a Performance,
Patch, or Rhythm Set, the changes you have made will be
lost. If you wish to keep the data, store it into internal
memory (user memory).
Internal Write Protect
The Internal Write Protect setting is provided to help
prevent the accidental overwriting of data in the user
memory. When saving new data to the user memory,
you must turn off Internal Write Protect. If you attempt
to save data when it is on, the following display will
appear.
fig.10-03
Change the displayed ON to OFF and press [ENTER] to
turn Internal Write Protect off. Press [ENTER] once
again, and the data will be written into the user memory.
Once you disable Internal Write Protect, it will remain
disabled until the XV-88's power is turned off. When the
power is turned on once again, it will be reset to ON.

Saving a Performance

The settings of the current Performance will be written into
user memory. Press [UTILITY] in Performance mode, and
perform Write operation.
fig.10-04.e
Writing destination Performance (group, number, name)
By holding down [SHIFT] and pressing [UTILITY], you
can move directly to the PERFORM WRITE page.
For more detailed information and instructions for this
procedure, refer to "Saving to Internal Memory" (p.
164).