Making Multi-Effects Settings; Setting Procedure; Functions Of Parameters - Roland XV-88 Owner's Manual

Chapter 7. Adding Effects
5. Either rotate the VALUE dial or press [INC/+]/[DEC/-]
to set the value.
6. Press [EXIT] to return to the PERFORM PLAY page.
An asterisk * appears at the left of the Performance
group on the display. This shows Performance settings
have been modified.
If you select another Performance in the group with an
asterisk *, the modified Performance settings will be lost.
To keep these modified settings, perform the save
operation (p. 164).

Making Multi-Effects Settings

You can make the settings for Multi-Effects used by Patches/
Rhythm Sets/Performances.

Setting Procedure

1. After confirming that you are in Patch/Rhythm Set/
Performance mode, select the desired Patch/Rhythm
Set/Performance (p. 29, p. 35, p. 39).
2. Press [EDIT], getting the indicator to light, and then
press the [EFFECTS] function button.
3. Press
or to display the desired Edit page.
4. Press
or to move the cursor to the parameter
you're going to modify.
5. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric
keys to change the parameter value.
6. When you finish making settings, press [EXIT] to return
to the previous PLAY page.
An asterisk * will be displayed at the left of the Patch/
Rhythm Set/Performance group. This indicates that the
Patch/Rhythm Set/Performance settings have been
modified.
If you select another Patch/Rhythm Set/Performance in
the group with an asterisk *, the modified Patch/
Rhythm Set/Performance settings will be lost. To keep
these modified settings, perform the save operation (p.
164).
114

Functions of Parameters

The functions of Multi-effects parameters are explained
according to the display arrangement.
MFX TYPE
fig.07-07
Type (Multi-Effects Type)
Use this parameter to select from among the 63 available
Multi-effects. For details on Multi-effects parameters, refer to
"Multi-Effects Types" (p. 117).
Source (Multi-Effects Source)
Selects the Multi-effects parameter settings that will be used
by the Performance. If you wish to use the Performance
settings, select PERFORM. If you wish to use the settings of
the Patch/Rhythm Set assigned to one of the Parts, select the
Part number.
If you have selected the Part number here, the Part
number will be displayed in the upper left of the MFX
parameter setting display of Performances.
fig.07-08
This parameter is not available when a Patch or Rhythm
Set is being selected.
When Patch or Rhythm Set Settings Are
Selected
When the Patch or Rhythm Set's Multi-effects settings
are selected, those settings are shown in each of the
Performance's MFX settings pages, and the settings can
be then be changed as well. Changes to Patch or Rhythm
Set Multi-effects parameter settings are lost when
another Patch or Rhythm Set is selected. To keep the
modified settings, save the Patch/Rhythm Set settings
(p. 164).