Roland XV-88 Owner's Manual page 112

Chapter 7. Adding Effects
Audio Signal Flow
The audio path of direct sounds or sounds that have been passed through the effects in Performance mode is shown in the figure
below.
fig.07-05.e
Performance
Part
3
Chorus
12
13
REV
MAIN M+R
11
A B
112
4
1
MFX
Multi-
Reverb
Effects
10 6
7
8
9 5
A B A
Patch/
Rhythm Set
2
A/1/2 B/3/4 PATCH
The Output Assign settings of the Patch/Rhythm Set
assigned to the Part will be used (p. 108).
1 Output Assign (p. 113)
2 Output Level (p. 113)
3 Chorus Send Level (p. 113)
4 Reverb Send Level (p. 113)
5
Multi-effects Output Assign (p. 116) *
6 Multi-effects Dry Send Level (p. 116) *
7
Multi-effects Chorus Send Level (p. 116) *
8 Multi-effects Reverb Send Level (p. 116) *
9 Reverb Output Assign (p. 160) *
10 Reverb Level (p. 160) *
11 Chorus Output Assign (p. 158) *
12 Chorus Level (p. 158) *
13 Chorus Output Select (p. 158) *
* The settings for a Patch or Rhythm Set assigned to a Part
depends on which of the Parts 1–16 the Source parameter
B
in each effect is set to (p. 114, p. 156, p. 159).
stereo signal mono signal