Roland XV-88 Owner's Manual page 149

128-voice expandable synthesizer 4x expansion with 2xsrx
Hide thumbs Also See for XV-88:
Table of Contents

Advertisement

Level (Output Level) #
Adjust the output level.
53: OVERDRIVE 2
This is an overdrive that provides heavy distortion.
fig.MFX-53
L in
Amp
Overdrive
Simulator
R in
Drive #
Adjust the amount of distortion. The volume will change
together with the degree of distortion.
Level (Output Level)
Adjust the output level.
LowGain (Low Gain)
Adjust the low frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the low
frequency range.
Hi Gain (High Gain)
Adjust the high frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the high
frequency range.
Amp Type (Amp Simulator Switch/Type)
Turns the Amp Simulator on/off.
And adjust the type of guitar amp.
SMALL: small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack amp
3-STACK: large triple stack amp
Tone
Adjust the sound quality of the Overdrive effect.
Pan (Output Pan) #
Adjust the stereo location of the output sound. A setting of
L64 is far left, 0 is center, and 63R is far right.
L out
Pan L
2-Band
EQ
Pan R
R out
Chapter 7. Adding Effects
54: DISTORTION 2
This is a distortion effect that provides heavy distortion.
fig.MFX-54
L in
Amp
Distortion
Simulator
R in
Drive #
Adjust the amount of distortion. The volume will change
together with the degree of distortion.
Level (Output Level)
Adjust the output level.
LowGain (Low Gain)
Adjust the low frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the low
frequency range.
Hi Gain (High Gain)
Adjust the high frequency gain (amount of boost or cut).
Positive (+) settings will emphasize (boost) the high
frequency range.
Amp Type (Amp Simulator Switch/Type)
Turns the Amp Simulator on/off.
And adjust the type of guitar amp.
SMALL: small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack amp
3-STACK: large triple stack amp
Tone
Adjust the sound quality of the Overdrive effect.
Pan (Output Pan) #
Adjust the stereo location of the output sound. A setting of
L64 is far left, 0 is center, and 63R is far right.
L out
Pan L
2-Band
EQ
Pan R
R out
149

Advertisement

Table of Contents
loading

Table of Contents