Roland XV-88 Owner's Manual page 222

Quick Reference of Procedures
Modifying Patch Settings
(basic procedure)
Changing the Patch
Assigned to a
Performance Part
Simultaneously
Modifying the Values of
Two or More Tones
Adjusting the Volume of
a Patch
Adjusting the Pan of a
Patch
Rhythm Set Mode
Selecting the Rhythm Set
Mode PLAY Page
Selecting a Rhythm Set
Selecting a Rhythm Set
Group
Selecting Rhythm Sets
Using the Digit Hold
Function
222
1. Turn on the [EDIT] indicator.
2. Use the function buttons to select the display group.
3. Use
/ to select the desired setting page.
4. Turn off the [EDIT] indicator.
5. Use TONE SELECT [1]–[4] (function buttons) to select the
Tone.
6. Use
/ to select a Parameter.
7. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to modify the value.
* If you wish to move to a different display group, turn on the
[EDIT] indicator.
1. Press [PERFORM] + [PATCH].
2. Use
/ to select a Part.
3. Use the VALUE dial, [INC/+], [DEC/-], or the numeric
keys to choose the Patch.
The rest procedure is the same as for the basic procedure listed
above.
In a Tone setting display, hold down the TONE SELECT [1]–
[4] (function button) for one Tone, and press the button(s) for
the other Tone(s) you want to edit.
Level parameter (PATCH/COMMON/PATCH LVL&PAN)
Pan parameter (PATCH/COMMON/PATCH LVL&PAN)
Press [RHYTHM].
Use the VALUE dial, [INC/+], [DEC/-], or the numeric keys
to choose a Rhythm Set.
USER: Press [USER].
CD-A–H: Press [CARD]
PR-A–F, H: Press [PRESET]
XP-A–D: Press [EXP] [A]–[D].
1. Press [SHIFT] + numeric key [0] (turn on the Digit Hold
function).
2. Use the numeric keys to specify the number of the one's
place.
* To turn off the Digit Hold function, press [SHIFT] + [0] once
again.
[A]–[H].
[A]–[F], [H].