Copying Another Effect Setting (Effects Copy) - Roland XV-88 Owner's Manual

Copying Another Effect
Setting (Effects Copy)
This function lets you copy data of any Performance, Patch,
or Rhythm Set into the currently selected Performance,
Patch, or Rhythm Set. This function can help you save time.
1. Make sure that a Patch, Rhythm Set, or Performance is
selected.
2. Press [UTILITY], getting its indicator to start blinking.
3. Press the numeric key [2], then
PATCH/RHYTHM/PERFORM FX COPY page.
fig.10-14.e
Copy source
4. Press the cursor buttons to move the cursor to the
parameter you wish to set.
5. Either rotate the VALUE dial or press [INC/+]/[DEC/-]
to set the value.
When the cursor is located at Number, you can also use
[USER], [PRESET], and [A]–[F] to select a group, and
then use the numeric keys to choose the number.
6. Press
to move to the next display, and then select the
contents of the effect that you wish to copy.
fig.10-15.e
Copy type
7. Either by rotating the VALUE dial or by pressing [INC/
+]/[DEC/-], set the value.
ALL: Multi-effects, Chorus, and Reverb settings
MFX: Multi-effects settings
CHORUS: Chorus settings
REVERB: Reverb settings
CHO&REV: Chorus and Reverb settings
8. Press [ENTER] to execute the Copy operation.
9. Press [UTILITY] to return to the previous page.
or to call up the
Copy source Performance/
Patch/Rhythm Set
(group, number, name)
Chapter 7. Adding Effects
161