Roland XV-88 Owner's Manual page 227

Deleting a File from
Memory Card
Checking the Free Area
of a Memory Card, etc.
Controlling External MIDI Devices
Setting the MIDI
Transmit Channel for
Performance Mode
(for each Zone)
Turning the MIDI
Transmit Switch On/Off
for Performance Mode
(for each Zone)
Setting the MIDI
Transmit Channel for
Patch/Rhythm Set Mode
Turning On/Off the
Transmit Switch of
Program Change
Message
Turning On/Off the
Transmit Switch of Bank
Select Messages
Switching Multiple Tones
on External MIDI Devices
at Once When Switching
the Performance
Quick Reference of Procedures
1. Press [UTILITY].
2. Select "1. CARD" on the UTIL 2 page.
3. Select "3. DELETE."
4. Select the file that you wish to delete.
5. Press [ENTER].
1. Press [UTILITY].
2. Select "1. CARD" on the UTIL 2 page.
3. Select "5. INFO."
Channel parameter (ZONE/MIDI/MIDI)
Tx parameter (ZONE/MIDI/MIDI)
Tx Ch parameter (SYSTEM/MIDI/PATCH MIDI)
Program parameter (SYSTEM/MIDI/TRANSMIT MIDI)
Bank Sel parameter (SYSTEM/MIDI/TRANSMIT MIDI)
1. Set the Tx parameter (ZONE/MIDI/MIDI) of the Zone to
be used to ON.
2. Set the Bank Select MSB/LSB parameter (ZONE/EXT
CONTROL/EXT PC) to match the Bank Select of the
external MIDI device.
3. Set the P.C# parameter (ZONE/EXT CONTROL/EXT
P.C) to match the Program Change number for the Tone
you want the external MIDI device to select.
4. Save the Performance.
5. Switch to the saved Performance from other
Performances.
227