Selecting The Way The Direct Sound Is Output - Roland XV-88 Owner's Manual

Chapter 7. Adding Effects
Selecting the Way the Direct
Sound is Output
Here, set the way the direct sound is output for each Patch or
Rhythm Set. The settings made here determine whether or
not the signal passes through the Multi-effects, the jack used
to output the sound, and the type of output (stereo or mono).
You can select the way the direct sound is output for
each Tone or Rhythm Tone individually (p. 109).
About the Output Jacks
The XV-88 is equipped with four OUTPUT jacks. Patch
and Rhythm Set sounds are output from any of these
jacks. Each jack can of course output sounds monaurally,
and by using two jacks as a pair, you can output sounds
in stereo (left/right).
Additionally, you can change the jacks used to output
the sounds for each of the Tones and Rhythm Tones
individually. For example, when playing a Rhythm Set,
you can output the snare drum in stereo from the
OUTPUT A (MIX) jacks, the bass drum in mono from the
INDIVIDUAL 3 jack, and the hi-hat in mono from the
INDIVIDUAL 4 jack. With this arrangement, you can
process each of the Rhythm Tones with a different effect.
1. After confirming that you are in Patch/Rhythm Set
mode, select the desired Patch/Rhythm Set (p. 29, p. 39).
2. After pressing [EDIT] to make the indicator light up,
press the [COMMON] function button, and
press or to display the PATCH COMMON
page.
fig.05-12
When a Rhythm Set is selected, display the RHYTHM
COMMON page.
3. Press
or to move the cursor to "Output Assign."
4. Rotate the VALUE dial, or press [INC/+]/[DEC/-] to
specify how the direct sound will be output.
108
Output Assign
Specifies for each Patch/Rhythm Set how the direct sound
will be output.
MFX: Output in stereo through Multi-effects. You can also
apply Chorus or Reverb to the sound that passes through
Multi-effects.
OUTPUT A: Output to the OUTPUT A (MIX) jacks in stereo
without passing through Multi-effects.
OUTPUT B: Output to the OUTPUT B jacks in stereo without
passing through Multi-effects.
INDIV 1: Output to the INDIVIDUAL 1 jack in mono without
passing through Multi-effects.
INDIV 2: Output to the INDIVIDUAL 2 jack in mono without
passing through Multi-effects.
INDIV 3: Output to the INDIVIDUAL 3 jack in mono without
passing through Multi-effects.
INDIV 4: Output to the INDIVIDUAL 4 jack in mono without
passing through Multi-effects.
TONE: Output according to the settings for each Tone/
Rhythm Tone.
• When outputting in mono, the Pan setting is disabled.
• When the settings are such that signals are split and
output from the INDIVIDUAL 1 jack and INDIVIDUAL
2 jack, and no plug is inserted in the INDIVIDUAL 2
jack, the sounds from INDIVIDUAL 1 and INDIVIDUAL
2 are mixed together, then output from the
INDIVIDUAL 1 jack. This sound comprises the sounds
from the INDIVIDUAL 1 and 2 jacks.
If the Mix/Parallel parameter (SYSTEM/SETUP/
SYSTEM SETUP) is set to MIX, all sounds are output
from the OUTPUT A (MIX) jacks in stereo (p. 169).
• When setting the MFX, set the output destination with
the Output parameter (PATCH/EFFECTS/PATCH MFX
OUT)/(RHYTHM/EFFECTS/RHYTHM MFX OUT) for
the sound after it has passed through the Multi-effects
(p. 116).
• When set to TONE, the Output Assign parameter
(PATCH/EFFECTS/OUTPUT)/(RHYTHM/EFFECTS/
OUTPUT) is set for each Tone or Rhythm Tone (p. 109).
• Chorus and Reverb are output in mono at all times.