Roland XV-88 Owner's Manual page 138

Chapter 7. Adding Effects
36: FLANGER DELAY
This effect connects a flanger and a delay in series.
fig.MFX-36
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Flg Dly (Flanger Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the flanger sound is heard.
FlgRate (Flanger Rate)
Adjust the modulation speed of the flanger effect.
Flg Dpt (Flanger Depth)
Adjust the modulation depth of the flanger effect.
Flg Fbk (Flanger Feedback Level)
Adjust the proportion (%) of the flanger sound that is fed
back into the effect. Negative (-) settings will invert the
phase.
Flg Bal (Flanger Balance) #
Adjust the volume balance between the direct sound and the
flanger sound. With a setting of "D100:0W," only the direct
sound will be output. With a setting of "D0:100W," only the
flanger sound will be output.
DlyTime (Delay Time)
Adjust the time delay from when the direct sound begins
until the delay sound is heard.
Dly Fbk (Delay Feedback Level)
Adjust the proportion (%) of the delay sound that is fed back
into the delay input. Negative (-) settings will invert the
phase.
HF Damp
Adjust the frequency above which delayed sound fed back to
the delay input will be cut. If you do not want to cut the high
frequencies of the delay feedback, set this parameter to
BYPASS.
Delay Balance #
Adjust the volume balance between the flanger sound that is
sent through the delay and the flanger sound that is not sent
through the delay. With a setting of "D100:0W," only the
flanger sound will be output. With a setting of "D0:100W,"
only the flanger sound that is sent through the delay will be
output.
138
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Level (Output Level)
Adjust the output level.
37: CHORUS FLANGER
This effect connects a chorus and a flanger in series.
fig.MFX-37
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Cho Dly (Chorus Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the chorus sound is heard.
ChoRate (Chorus Rate)
Adjust the modulation speed of the chorus effect.
Cho Dpt (Chorus Depth)
Adjust the modulation depth of the chorus effect.
Cho Bal (Chorus Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of "D100:0W," only the direct
sound will be output. With a setting of "D0:100W," only the
chorus sound will be output.
Flg Dly (Flanger Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the flanger sound is heard.
FlgRate (Flanger Rate)
Adjust the modulation speed of the flanger effect.
Flg Dpt (Flanger Depth)
Adjust the modulation depth of the flanger effect.
Flg Fbk (Flanger Feedback Level)
Adjust the proportion (%) of the flanger sound that is fed
back into the effect. Negative (-) settings will invert the
phase.
Flanger Balance #
Adjust the volume balance between the chorus sound and
the chorus sound that is passed through the flanger. With a
setting of "D100:0W," only the chorus sound will be output.
With a setting of "D0:100W," only the chorus sound that
passes through the flanger will be output.
Level (Output Level)
Adjust the output level.
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D