Fuser Removal - Konica Minolta Bizhub 4700P Service Manual

bizhub 4700P/bizhub 4000P Service Manual
7. Remove the six screws (B) securing the redrive assembly.
6.7.5

Fuser removal

1. Remove the right cover. See Right cover removal.
2. Remove the rear door and cover. See Rear door and cover removal.
3. Remove the redrive assembly. See Redrive assembly removal
4. Disconnect the cable JEXIT1 from the controller board.
5. Disconnect the two cables (A).
6. Remove the two screws (B) securing the fuser.
- 246 -