Konica Minolta Bizhub 4700P Service Manual page 185
Hide thumbs
Also See for Bizhub 4700P:
- Quick reference (2 pages) ,
- User manual (212 pages) ,
- Quick reference manual (31 pages)
Table of Contents
Advertisement
Removing a cable from the horizontal sliding contact connector
1. Simultaneously slide the two tabs located on the ends of the locking actuator away from the
connector.
2. Slide the cable out of the connector.
Inserting a cable into the horizontal sliding contact connector
1. When installing the cable, check the locking actuator to verify it is in the open position. If you are
opening the connector, pull back on both end tabs using equal force to avoid breaking the
connector.
bizhub 4700P/bizhub 4000P Service Manual
- 184 -
Advertisement
Table of Contents
