Vertical Mount Contact Connector - Konica Minolta Bizhub 4700P Service Manual

bizhub 4700P/bizhub 4000P Service Manual
3. Place your finger in the middle of the actuator, and then rotate the locking actuator to the locked
position.

Vertical mount contact connector

This FRU contains a vertical mount contact connector. Read the instructions before proceeding.
The vertical mount contact connector uses a back flip locking actuator to lock the ribbon cable into the
Zero Insertion Force (ZIF) connector. The cable is inserted vertically into the connector.
Warning—Potential Damage: When opening or closing this type of actuator, gently lift the center of
the actuator using your finger. Do not use a fingernail or screwdriver to open the actuator. This could
damage the ribbon cable. Do not close the actuator from the ends of the actuator.
- 181 -