Redrive Assembly Removal - Konica Minolta Bizhub 4700P Service Manual

7. Remove the ground (B), sensor (C), and sensor flag (D).
6.7.4

Redrive assembly removal

1. Remove the right cover. See
2. Remove the left cover. See
3. Remove the rear door and cover. See
4. Remove the top cover. See
5. Disconnect the cable JNRW1 from the controller board.
6. Remove the two screws (A), and then detach the reverse solenoid.
Note: Do not disconnect the reverse solenoid cable from the controller board.
bizhub 4700P/bizhub 4000P Service Manual
Right cover removal.
Left cover removal.
Rear door and cover
Top cover removal.
- 245 -
removal.