Konica Minolta Bizhub 4700P Service Manual page 81

Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, select Continue on the printer control panel to
clear the message and continue printing. Press [OK] to confirm.
Imaging unit nearly low [84.xy]
If necessary, select Continue on the printer control panel to clear the message and continue printing.
Press [OK] to confirm.
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the "Replacing
supplies" section of the User's Guide.
If necessary, select Continue on the printer control panel to clear the message and continue printing.
Press [OK] to confirm.
Incorrect paper size, open [paper source] [34]
Try one or more of the following:

Load the correct size of paper in the tray.

From the printer control panel, select Continue to clear the message and print using a different tray.
Press [OK] to confirm.

Check the tray length and width guides and make sure the paper is loaded properly in the tray.

Make sure the correct paper size and type are specified in the Printing Preferences or in the Print
dialog.

Make sure the paper size and type are specified in the Paper menu on the printer control panel.

Make sure that the paper size is correctly set. For example, if MP Feeder Size is set to Universal,
then make sure the paper is large enough for the data being printed.

Cancel the print job.
Insert Tray [x]
Insert the indicated tray into the printer.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or select Continue on the printer control panel to disable Resource
Save, clear the message, and continue printing. Press [OK] to confirm.
Insufficient memory to collate job [37]
Try one or more of the following:

From the printer control panel, select Continue to print the part of the job already stored and begin
collating the rest of the print job. Press [OK] to confirm.

Cancel the current print job.
bizhub 4700P/bizhub 4000P Service Manual
- 80 -