Konica Minolta Bizhub 4700P Service Manual page 239

Hide thumbs Also See for Bizhub 4700P:
Table of Contents

Advertisement

bizhub 4700P/bizhub 4000P Service Manual
9. Remove the screw (D) securing the ACM lift cam to the ACM housing.
10. Remove the ACM lift cam by sliding it off the shaft.
11. Remove the screw (E), and then remove the media present sensor flag.
Note: Use a #1 Phillips screwdriver.
- 238 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 4000p

Table of Contents