Front Door Removal - Konica Minolta Bizhub 4700P Service Manual

3. Remove the four screws (A), and then remove the jam access cover.

6.5.15 Front door removal

Note: This is not a FRU.
1. Remove the right cover. See
2. Disconnect the following cables from the controller board:
- JUICC1
- JCVR1
- If applicable, JUSBF1
3. Squeeze the latch, and then detach the link from the front door.
bizhub 4700P/bizhub 4000P Service Manual
Right cover removal.
- 219 -