Konica Minolta Bizhub 4700P Service Manual page 64

241 paper jam messages
Error code Description
241.01 Paper over tray 1 trailing edge sensor on
warmup.
241.02 Sensor (input) early arriving jam.
241.03 Tray 1 trailing edge sensor never became
covered when feeding a sheet from an option
below.
241.07 Option tray 1 trailing edge sensor never
became uncovered when feeding a sheet from
an option below.
241.13 The media is late reaching the sensor (input)
within the specified time from tray 1.
241.14 The media is late reaching the sensor (input)
within the specified time from tray 1.
241.15 Media tray 1, tray pulled jam.
241.16 The engine timed out waiting for the tray 1 to
report 'ready' before the 1st pick attempt.
241.17 Page was not properly picked from tray 1.
Have not exhausted all pick retry attempts as
there are sheets committed to the paper path
from below.
241.18 Failed to feed from tray 1. Exhausted all pick
retries. Paper present sensing indicates media
is in the tray.
241.20 Took too long to ramp up media feeding
in tray 1.
241.21 Media feed stall in tray 1.
241.22 Media feed under-speed in tray 1.
241.24 Media feed stalled on the last Pick attempt in
tray 1.
241.29 Tray 1 lift plate failed to make the index sensor
while elevating.
241.32 Media tray not ready.
241.33 The media tray was pulled during the media
pick process.
bizhub 4700P/bizhub 4000P Service Manual
- 63 -
Action
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
Go to Tray 1 jam service
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.
check.