Major Keys On The Agilent 1100 Control Module - Agilent Technologies 1100 Series Service Manual

6 Control Module Screens for the Nano Pump

Major keys on the Agilent 1100 Control Module

ESC
m
i
Enter
Done
On/Off
Start
Plot
Views
The screens shown on the next pages are based on the following firmware revisions:
NO TE
Control Module firmware revision B.02.0x (G1323B).
HPLC Module firmware revision 5.0x.
In case the control module's display seems to be frozen (hang-up due to a communication
NO TE
problem on the CAN bus) unplug the control module from the HPLC module and reconnect.
232
Return to previous screen, abort any change of parameters and toggle between
the last two top layer views
Open context sensitive menus
Information/Help
Store changed parameters or execute a choice
(If available) Activate settings of current screen
Switch on individual Instrument(s) or complete System
Start a location range or sequence
View online signals
Change between analysis - (samples)- status - system views
1100 Series Nano Pump Service Manual