Exchanging Status Light Pipe - Agilent Technologies 1100 Series Service Manual

3 Repairing the Pump

Exchanging Status Light Pipe

Frequency
Tools required
Parts required
Preparation for this procedure:
• Remove the front cover and top cover, see "Removing the Top Cover and Foam" on page 131.
1 The status light pipe is clipped into the top cover.
152
If part is broken
Screwdriver Pozidriv #1
Status light pipe 5041-8384
2 Replace the top cover, see "Replacing the Top
Cover and Foam" on page 154.
3 Replace the nano pump into the stack and
reconnect the cables and capillaries.
4 Turn on the nano pump.
1100 Series Nano Pump Service Manual