Cleaning The Nano Pump; Using The Esd Strap - Agilent Technologies 1100 Series Service Manual

3 Repairing the Pump

Cleaning the Nano Pump

The nano pump case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and a mild
detergent. Do not use an excessively damp cloth as liquid can drop into the
nano pump.
Do not let liquid drip into the nano pump. It could cause shock hazard and it could
WA RN ING
damage the nano pump.

Using the ESD Strap

Electronic boards are sensitive to electrostatic discharge (ESD). In order to
prevent damage, always use an ESD strap supplied in the standard accessory
kit (see "Nano Pump Accessory Kit G2226-68705" on page 172) when handling
electronic boards and components.

Using the ESD Strap

1 Unwrap the first two folds of the band and wrap the exposed adhesive side
2 Unroll the rest of the band and peel the liner from the copper foil at the
3 Attach the copper foil to a convenient and exposed electrical ground.
Figure 12
106
firmly around your wrist.
opposite end.
Using the ESD Strap
1100 Series Nano Pump Service Manual