Optional Interface Boards
The Agilent 1100 Series modules have one optional board slot that allows
addition of an interface board to the modules.
Table 48
Description
BCD Board
Fuse 250 mA (four are on the board)
LAN Board (see next page for details)
BCD Board
The BCD board provides a BCD output for the bottle number of the
Agilent 1100 Series well-plate sampler and four external contacts. The
external contact closure contacts are relay contacts. The maximum settings
are: 30 V (AC/DC); 250 mA (fused). There is a general purpose cable available
to connect the BCD output, see "BCD Cables" on page 184 and the external
outputs, see "External Contact Cable" on page 189 to external devices.
1100 Series Nano Pump Service Manual
Optional Interface Boards
Introduction to the Nano Pump
Part Number
G1351-68701
2110-0004
5
215