2
Troubleshooting and Test Functions
Basic System Troubleshooting
In this troubleshooting guide, you will find a Possible Causes/Suggested
Actions approach to troubleshooting and correcting certain capillary LC
system problems.
The problems are categorized by the following symptoms:
This troubleshooting guide deals with systemic problems of the capillary LC. For detailed
NO TE
diagnostic, troubleshooting and repair information on specific LC modules (status
indicators, error messages, diagnostic tests, etc.), refer to the Reference Manual supplied
with the specific LC module.
92
System Pressure Abnormally Low
System Pressure Abnormally High
EMPV failed to initialize (micro mode only)
Unstable column flow and/or system pressure
Poor peak shape
98
Failure to produce peaks, or abnormally small peaks, after injection
Wandering Detector Baseline
User interface displays error messages for specific modules
93
94
95
96
100
1100 Series Nano Pump Service Manual
99
101