Agilent Technologies 1100 Series Service Manual page 140

3 Repairing the Pump
4 Slide the pump head assembly onto the pump drive.
Apply a small amount of pump head grease to the
pumphead screws and the balls of the spindle drive.
Tighten screws stepwise with increasing torque.
128
5 Reconnect the capillaries, tubing and the active inlet
Balls of
spindle drive
Pump head
screws
valve cable to the connector.
Active inlet valve
1100 Series Nano Pump Service Manual
AIV connector
Adapter
capillary
Inlet tube