Chart Options; Day/Night View - Garmin G1000 Reference Manual

NOTAMs are not available with FliteCharts. The
NOTAM Softkey label appears subdued and is disabled.
When no terminal procedure chart is available, the
banner CHART NOT AVAILABLE appears on the screen.
The CHART NOT AVAILABLE banner does not refer to
the FliteCharts subscription, but rather the availability
of a particular airport chart selection or procedure for a
selected airport.
If there is a problem in rendering the data (such as a
data error or a failure of an individual chart), the banner
UNABLE TO DISPLAY CHART is then displayed.

Chart Options

Pressing the CHRT OPT Softkey displays the next
level of softkeys, the chart options level (Figure 8-35).
Pressing the ALL Softkey shows the entire chart on
the screen.
Figure 11-24 Airport Information Page, ALL View Selected
Pressing the FIT WIDTH Softkey fits the width of the
chart in the display viewing area.
Pressing the FULL SCN Softkey alternates between
removing and replacing the data window to the right.
190-00384-09 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 11 – ADDITIONAL

Day/Night View

FliteCharts can be displayed on a white or black
background for day or night viewing. The Day View offers
a better presentation in a bright environment.
Selecting Day, Night, or Automatic View:
1) While viewing a terminal chart press the MeNU
Key to display the Page Menu OPTIONS (see Figure
11-22).
2) Turn the large FMS Knob to highlight the Chart
Setup Menu Option and press the eNT Key.
3) Turn the large FMS Knob to move to the COLOR
SCHEME Option (see Figure 11-22).
4) Turn the small FMS Knob to choose between Day,
Auto, and Night Options.
5) If Auto Mode is selected, turn the large FMS
Knob to select the percentage field. Use the small
FMS Knob to change the percentage value. The
percentage value is the day/night crossover point
based on the percentage of backlighting intensity.
For example, if the value is set to 15%, the day/
night display changes when the display backlight
reaches 15% of full brightness.
The display must be changed in order for the new
setting to become active. This may be accomplished
by selecting another page or changing the display
range.
6) Press the FMS Knob when finished to remove the
Chart Setup Menu.
FEATURES
11-15