Garmin G1000 Reference Manual page 105

4) V4 is now entered into the flight plan.
a) Press the FMS Knob to activate the cursor.
b) The desired entry point for V4 (TOP) must now be
entered. Turn the large FMS Knob to highlight
the desired flight plan insertion point as shown
in Figure 7-13. The V4 entry point (TOP) is placed
immediately above the highlighted waypoint
(SLN).
Figure 7-13 Begin Adding V4 to the Flight Plan
190-00384-09 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 7 – NAVIGATION
c) Turn the small FMS Knob to display the Waypoint
Information Window. Enter the desired beginning
point for V4 leg, in this example, Topeka VOR
(TOP) is used as shown in Figure 7-14.
Figure 7-14 entering V4 entry Point
d) Press the eNT Key. TOP is now inserted into the
flight plan as in Figure 7-15.
Figure 7-15 TOP Inserted into the Flight Plan
7-7