Nav Radio Audio Selection; Intercom System (Ics) Isolation - Garmin G1000 Reference Manual

Figure 5-5 Marker Beacon
5.5

NAV RADIO AUDIO SElECTION

Pressing DME, ADF, NAV1, or NAV2 selects and
deselects the audio source and activates the annunciator.
Selected audio can be heard over the headset and the
speakers. These four keys can be selected individually
or together.
Figure 5-6 Navigation Radios
PILOT KeY COPLT KeY
Annunciator Annunciator
OFF
ON
OFF
ON
190-00384-09 Rev. A
Pilot Hears
Selected radios, aural
OFF alerts, pilot, copilot,
passengers, music
Selected radios, aural
OFF
alerts, pilot
Selected radios,
ON aural alerts, pilot,
passengers, music
Selected radios, aural
ON
alerts, pilot, copilot
Table 5-1 ICS Isolation Modes
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 5 – AUDIO PANEL
5.6

INTERCOM SYSTEM (ICS) ISOlATION

Press the PILOT and/or COPLT Key to select who
is isolated from hearing the Nav/Com radios and music.
Selection scenarios are addressed in Table 5-1.
Figure 5-7 ICS Isolation
Copilot Hears
Selected radios, aural Selected radios, aural alerts,
alerts, pilot, copilot, pilot, copilot, passengers,
passengers, music music
Copilot, passengers,
Copilot, passengers, music
music
Selected radios, aural alerts,
Copilot
pilot, passengers, music
Selected radios, aural
Passengers, music
alerts, pilot, copilot
Passenger Hears
5-3