Activate An Approach In The Active Flight Plan - Garmin G1000 Reference Manual

SECTION 9 – PROCEDURES
9) The cursor moves to the altitude field. Turn the
small FMS Knob to enter the published decision
altitude for the selected approach procedure. Press
the eNT Key.
Figure 9-9 entering Minimum Altitude
10) Turn the large FMS Knob to highlight 'Activate?'
and press the eNT Key to activate the approach.
Activating the approach initiates a direct-to for
IAF and the G1000 immediately begins navigating
to the IAF. Selecting 'Load?' adds the procedure
to the flight plan without immediately using it for
navigation guidance.

Activate An Approach in the Active Flight Plan

1) With the Navigation Map Page displayed, press the
PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE
APPROACH'.
3) Press the eNT Key. The approach procedure is now
active and a direct-to is initiated to the IAF.
9-4
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III 190-00384-09 Rev. A