SECTION 11 – ADDITIONAL
FEATURES
If a chart is available for the destination airport, or the
airport selected in the active flight plan, the chart appears on
the screen. When no flight plan is active, or when not flying
to a direct-to destination, pressing the SHW CHRT Softkey
displays the chart for the nearest airport, if available.
When no terminal procedure chart is available for the
nearest airport or the selected airport, the banner CHART
NOT AVAILABLE appears on the screen. The CHART
NOT AVAILABLE banner does not refer to the Jeppesen
subscription, but rather the availability of a particular
airport chart selection or procedure for a selected airport.
If there is a problem in rendering the data (such as a
data error or a failure of an individual chart), the banner
UNABLE TO DISPLAY CHART is then displayed.
Chart Options
Pressing the CHRT OPT Softkey displays the next
level of softkeys, the chart options level.
Pressing the FULL SCN Softkey displays the chart
using the full width of the screen.
Pressing the ALL Softkey shows the full approach
chart on the screen.
Figure 11-17 Approach Information Page, ALL View
11-12
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
Pressing the HEADER Softkey shows the header view
(approach chart briefing strip) on the screen.
Figure 11-18 Approach Information Page, Header View
Pressing the PLAN Softkey shows the approach chart
two dimensional plan view.
Figure 11-19 Approach Information Page, Plan View
190-00384-09 Rev. A