Garmin G1000 Reference Manual page 20

SECTION 1
SYSTEM OVERVIEW
NEXRAD (optional) – Press to display NEXRAD
weather and coverage information on the Inset
Map.
XM LTNG (optional) – Press to display XM lightning
information on the Inset Map.
BACK – Press to return to the previous level softkey
configuration.
PFD – Press to display the additional softkeys for
additional configuration of the PFD.
DFLTS – Press to reset default settings on the PFD.
SYN VIS – Displays the softkeys for enabling or
disabling Synthetic Vision features.
PATHWAY – Displays rectangular boxes
representing the horizontal and vertical flight
path of the active flight plan.
SYN TERR – Enables synthetic terrain
depiction.
1-6
DME
SYN VIS
BRG1 (NAV1)
BRG1 (GPS)
BRG1 (ADF)
BRG1 (OFF)
PATHWAY SYN TERR HRZN HDG
APTSIGNS
Figure 1-4 PFD Configuration Softkeys
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
HRZN HDG – Displays compass heading along
the Zero-Pitch line.
APTSIGNS – Displays position markers for
airports within approximately 15 nm of the
current aircraft position. Airport identifiers
are displayed when the airport is within
approximately 9 nm.
DME
HSI FRMT ALT UNIT
BRG2 (NAV2)
BRG2 (GPS)
BRG2 (ADF)
BRG2 (OFF)
360 HSI ARC HSI
METERS IN HPA
WIND – Displays softkeys to select wind data
parameters.
OPTN 1 – Wind direction arrows with headwind
and crosswind components.
OPTN 2 – Wind direction arrow and speed.
OPTN 3 – Wind direction arrow with direction
and speed.
OFF – Information not displayed.
DME (optional) – Press to display the DME
Information Window.
ALERTS
ALERTS
Press the STD BARO or
BACK Softkey to return to
the top-level softkeys
ALERTS
ALERTS
ALERTS
ALERTS
190-00384-09 Rev. A