Garmin G1000 Reference Manual page 100

SECTION 7 – NAVIGATION
9) Press the eNT Key. The cursor is placed in the 'VNV'
offset distance field.
10) Enter the desired target altitude offset from the
selected Direct-to.
11) Press the eNT Key to highlight 'Activate?' or turn the
large FMS Knob to highlight the 'COURSE' field.
12) Enter the desired course to the waypoint.
13) Press the eNT Key to highlight 'ACTIVATE?'.
14) Press the eNT Key again to activate the Direct-to.
Select a Direct-to Destination to a Flight Plan
Waypoint
1) While navigating an active flight plan, press the
Direct-to (
2) Turn the small FMS Knob to the left to display a list
of flight plan waypoints as shown in Figure 7-3.
Figure 7-3 Flight Plan Waypoint List (MFD)
3) Turn the large FMS Knob to select the desired
waypoint.
4) Press the eNT Key. The cursor is now displayed on
'ACTIVATE?'.
5) Press the eNT Key again to activate a Direct-to.
7-2
) Key.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
Select a Direct-to Destination to a Nearest
Airport
1) Press the Direct-to (
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-3. The list is populated only when navigating a
flight plan.
Figure 7-4 Nearest Airport List (MFD)
3) Turn the small FMS Knob to the right to display the
'NRST' airports to the aircraft's current position as
shown in Figure 7-4.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the eNT Key. The cursor is now displayed on
'ACTIVATE?'.
6) Press the eNT Key again to activate a Direct-to.
Select a Direct-to Destination to a Recently
Entered Identifier
1) Press the Direct-to (
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-3. The list is populated only when navigating a
flight plan.
) Key.
) Key.
190-00384-09 Rev. A