Garmin G1000 Reference Manual page 183

Figure 11-29 Scheduler (Utility Page)
entering a scheduler message:
1)
Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the
flashing cursor.
3) Turn the large FMS Knob to highlight the first
empty scheduler message naming field.
4) Use the FMS Knob to enter the message text to be
displayed in the Alerts Window and press the eNT
Key.
5) Press the eNT Key again or use the large FMS Knob
to move the cursor to the field next to Type.
6) Turn the small FMS Knob to select the message
alert type:
• Event—Message issued at the specified
date/time
• One-time—Message issued when the mes-
sage timer reaches zero (default setting)
• Periodic—Message issued each time the
message timer reaches zero
190-00384-09 Rev. A Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 11 – ADDITIONAL
7) Press the eNT Key again or use the large FMS Knob
to move the cursor to the next field.
8) For periodic and one-time message, use the FMS
Knob to enter the timer value (HH:MM:SS) from
which to countdown and press the eNT Key.
9) For event-based messages:
a) Use the FMS Knob to enter the desired date
(DD-MM-YY) and press the eNT Key.
b) Press the eNT Key again or use the large FMS
Knob to move the cursor to the next field.
c) Use the FMS Knob to enter the desired time
(HH:MM) and press the eNT Key.
10) Press the eNT Key again or use the large FMS Knob
to move the cursor to enter the next message.
Deleting a scheduler message:
1)
Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the
flashing cursor.
3) Turn the large FMS Knob to highlight the name
field of the scheduler message to be deleted.
4) Press the CLR Key to clear the message text. If
the CLR Key is pressed again, the message is
restored.
5) Press the eNT Key while the message line is cleared
to clear the message time.
FEATURES
11-19