Garmin G1000 Reference Manual page 21

BRG1 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the appropriate information.
NAV1 – Displays NAV1 waypoint frequency or
identifier and DME information in the BRG1
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG1 Information
Window.
ADF – Displays ADF in the BRG1 Information
Window when an otional ADF is installed.
OFF – Removes the BRG1 Information
Window.
HSI FRMT – Press to display the HSI formatting
softkeys.
360 HSI – Press to display the HSI in a 360
degree format.
ARC HSI – Press to display the HSI in an arc
format.
BRG2 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the appropriate information.
190-00384-09 Rev. A
Figure 1-5 XPDR (Transponder) Softkeys
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
NAV2 – Displays NAV2 waypoint frequency or
identifier and DME information in the BRG2
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG2 Information
Window.
ADF – Displays ADF in the BRG2 Information
Window when an otional ADF is installed.
OFF – Removes the BRG2 Information
Window.
ALT UNIT – Displays softkeys for setting the
altimeter and BARO settings to metric units:
METERS – When enabled, displays altimeter in
meters.
IN – Press to display the BARO setting as inches
of mercury.
HPA – Press to display the BARO setting as
hectopacals.
STD BARO – Press to set the barometric pressure
to standard pressure.
BACK – Press to return to the previous level softkeys.
ALERTS – Press to display the Alerts Window.
OBS – Press to select OBS Mode on the CDI when
navigating by GPS (only available with active leg).
DME
Press the BACK Softkey to return
to the top-level softkeys.
Press the BACK Softkey to return
to the previous softkey level.
SECTION 1
SYSTEM OVERVIEW
ALERTS
ALERTS
ALERTS
1-7