Nearest Airports Information On The Pfd - Garmin G1000 Reference Manual

Integrated flight deck cockpit reference guide for cessna nav iii
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

SECTION 7 – NAVIGATION
Access Information on a Specific Airport
1) With the Nearest Airports Page displayed, press the
APT Softkey to place the cursor in the 'NEAREST
AIRPORTS' field. The first airport in the nearest
airports list is highlighted.
2) Turn either FMS Knob to highlight the desired
airport.
3) Press the FMS Knob to remove the flashing
cursor.
Access Runway Information for the Selected
Airport
1) With the Nearest Airports Page displayed, press the
RNWY Softkey to place the cursor in the 'RUNWAYS'
field.
2) Turn the small FMS Knob to select the desired
runway.
3) Press the FMS Knob to remove the flashing
cursor.
Quickly Tune the COM Transceiver to a
Nearby Airport Frequency
1) With the Nearest Airports Page displayed, press
the FReQ Softkey to place the cursor in the
'FREQUENCIES' field.
2) Turn either FMS Knob to select the desired
frequency.
3) Press the eNT Key. The selected frequency is placed
in the COM standby frequency field.
4) Press the Frequency Transfer Key to place the
frequency in the active field.
5) Press the FMS Knob to remove the flashing
cursor.
7-26
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III

Nearest Airports Information on the PFD

Bearing TO
Airport Symbol
Identifier
Primary COM Frequency
Figure 7-61 Nearest Airports Window
Press the NRST Softkey to display the PFD Nearest Air-
ports Window.
View Information on a Specific Airport in the
List
1) With the Nearest Airports Window displayed, turn
either FMS Knob to place the cursor on the desired
airport identifier.
2) Press the eNT Key to display airport information.
3) Press the eNT Key again (cursor is on 'BACK') to
return to the list.
Load an Airport COM Frequency into the
Active COM
1) With the Nearest Airports Window displayed, turn
either FMS Knob to place the cursor on the desired
airport frequency shown in the window.
2) Press the eNT Key and the selected frequency is
placed in the COM standby frequency field.
3) Press the Frequency Transfer Key to make the
frequency the active frequency.
Distance
Runway Length
190-00384-09 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents