Activate An Approach In The Active Flight Plan - Garmin G1000 Cockpit Reference Manual

6) The cursor will move to the TRANSITIONS
field. Turn the large FMS Knob to highlight the
desired transition waypoint and press the ENT
Key. (The "Vectors" option assumes vectors will
be received to the final course segment of the
approach and will provide navigation guidance
relative to the final approach course.)
Figure 9-7 Selecting an Approach Transition
Turn the large FMS Knob to highlight 'Activate?'
7)
and press the ENT Key to activate the approach.
Selecting 'Load?' will add the procedure to the
flight plan without immediately using it for
navigation guidance.

Activate An Approach in the Active Flight Plan

1) With the Navigation Map Page displayed, press
the PROC Key.
Turn the large FMS Knob to highlight 'ACTIVATE
2)
APPROACH'.
3) Press the ENT Key. The approach procedure is
now active.
Garmin G1000 Cockpit Reference Guide for the Beechcraft A36/G36
SECTION 9 – PROCEDURES
9-3