Parameter Window X: Scene (1) To X: Scene (6) - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
3.2.9 Parameter window
X: Scene (1) to
X: Scene (6)
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window all settings for implementing light scenes are
undertaken.
The parameter window X: Scene (1) appears when in parameter window
the function 8 bit scene is parameterised with yes.
X: Function
The parameter window X: Scene (2) to (6) for scenes 4 to 18 are each
enabled in the previous parameter window X: Scene (y) (y = 1 to 5) with the
parameter Enable more scene assignments.
Note
With the common parameterisation of all outputs they all feature the same
scene parameters and thus switch the same brightness value on with
a scene recall.
The parameterisation undertaken in this parameter window X: Scene (y) is
only transferred to the Light Controller during a download, if in the parameter
window the scene enable Restore scene values with standard
X: Function
values has been set to yes.
How does a scene function?
This function permits the assignment of the output to up to 18 different
light scenes with corresponding programmable brightness values and
transition times. If a scene number is received via the object 8 bit
scene, the stored scene value (brightness value) is recalled.
Alternatively, the possibility exists to store the current brightness
value as the new scene value.
For further information see: Code table 8 bit scene telegram
54