ABB i-bus KNX Product Manual page 13

®
ABB i-bus KNX
User programs
Application program
Control Dim 2f 1-10V/1
Control Dim 4f 1-10V/1
© 2008 ABB STOTZ-KONTAKT GmbH
Device technology
Number of
Communication objects
62
118
Note
The programming requires ETS2 V1.3 or higher.
If ETS3 is used a *.VD3 or higher type file must be imported.
The application program for the ETS2/ETS3 can be found at ABB/Lighting
Devices/Illumination and Light Sensors/Control Dim xf 1-10V/1,
(x = 2 or 4, number of outputs).
The devices do not support the closing function of a project or the KNX
devices in the ETS. If you inhibit access to all devices of the project with
a BA password (ETS2) or a BCU code (ETS3), it has no effect on this
device.
Data can still be read and programmed.
Max. number of
group addresses
254
254
Max. number of
associations
255
255
11