Parameter Window X: Function - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
3.2.4 Parameter window
X: Function
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window additional functions of the output can be enabled.
Enable function "1 bit preset"
Options: no
yes
With this parameter the output can be enabled for a 1 bit preset.
This function is used to recall or save brightness values via a 1 bit object.
•
Yes: A further parameter appears:
Restore presets with standard value during download
Options: no
yes
This parameter defines if the preset values currently in the device
are overwritten during download by the set preset values in the ETS.
This function is useful for example if the settings made by the user
are to be reset and the lighting is to be set with a defined brightness
value.
The special properties of the presets are defined in the
parameter window.
X: Presets
39