Parameter Window X: Switch - ABB i-bus KNX Product Manual
Light controller with sensor lr/s with lf/u, intelligent installation systems
Hide thumbs
Also See for i-bus KNX:
- Product manual (264 pages) ,
- Product manual (49 pages) ,
- Product manual (166 pages)
Table of Contents
Advertisement
®
ABB i-bus
KNX
3.2.5
Parameter window
X: Switch
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window you set how the device reacts on a switch
command via the communication object Switch or Switch/Status.
Switch ON via
Options:
100 % (255)
last brightness value
99 % (252)
...
2 % (5)
1% (3)
This parameter determines the brightness of the lighting which is controlled
when a Switch or Switch/Status object receives the telegram value 1.
•
last brightness value: The brightness value before the last switch off is
restored. This is at the least, the brightness value of the lower dimming
value, see parameter window
X:
Dimming.
44
Advertisement
Table of Contents
