Preset Description - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
4.4

Preset description

© 2008 ABB STOTZ-KONTAKT GmbH
Planning and application
A parameterisable switching state can be retrieved with the help of presets.
Light scenes can therefore be implemented for example by a 1 bit object.
Retrieve preset
Retrieve Preset
Pushbutton
OFF
Light 1
Switch states (preset values) can be retrieved via the object Call preset 1
and 2. A maximum of 4 preset values are available for each output:
Action
Recall preset 1
Recall preset 2
Store preset
Store Preset
Pushbutton
ON
Light 1
The current switching state is stored as a new preset value via the object
Set preset 1 and 2. The user can for example adapt a light scene in this way.
The presets are stored via the following values:
Action
Save preset 1
Save preset 2
A similar behaviour applies for preset 3 and 4 with the objects Set preset 3
and 4 and Recall preset 3 and 4
ON
Light 2
Telegram
Object Call preset 1 and 2 = 0
Object Call preset 1 and 2 = 1
OFF
Light 2
Telegram
Object Set Preset 1 and 2 = 0
Object Set Preset 1 and 2 = 1
ON
Light 3
ON
Light 3
108