Parameter Window Light Sensor - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
3.2.2 Parameter window
Light sensor
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
In the parameter window Light sensor the Light Sensors LF/U 2.1 connected
to the Light Controller are assigned to the outputs.
If several Light Sensors are assigned to an output, it is necessary to define
which sensor value is used as the actual value (input variable) for the control
circuit.
For further information see:
Free light sensor setting to the outputs
Options: no
yes
A free light sensor setting to the outputs can be parameterised with these
parameters.
•
no: On the 2-fold LR/S, Light Sensor A is allocated to output A and
Light Sensor B is allocated to output B. On the 4-fold LR/S the
additional Light Sensor C is allocated to output C and Light Sensor D
is allocated to output D.
•
yes: The parameter window changes:
Parameter window X: Control
Constant lighting control
and
30