ABB i-bus KNX Product Manual page 10

®
ABB i-bus KNX
Brightness detection
Outputs load circuit rated values
Load circuit (relay) switching currents
Load circuit (relay) service life
Load circuit (relay) switching times
Connections ABB i-bus®
Connections control circuit
Connections light sensor LF/U 2.1
Connections load circuit
© 2008 ABB STOTZ-KONTAKT GmbH
Device technology
Lighting control operating range
Optimum installation height
LR/S type
Number of load outputs (floating)
U rated voltage
n
I rated current
n
Leakage loss per device at max. load
AC1* operation (cos ϕ = 0.8)
DIN EN 60 947-4-1
Fluorescent lighting load AX to
DIN EN 60 669-1
AC3* operation (cos ϕ = 0.6)
DIN EN 60 947-4-1
Minimum switching performance
DC current switching capacity (resistive load)
Lamp loads
Mechanical service life
Electronic service life to
AC1* (240 V/cos ϕ = 0.8)
AC5a* (240 V/cos ϕ = 0.45)
LR/S type
Maximum relay position change per output and
minute if all relays are switched simultaneously.
The position changes should be distributed
equally over the minute.
Maximum relay position change per output and
minute if only one relay is switched.
KNX bus connection terminal
Screw terminal with slotted screw
Ferrules without/with plastic sleeves
TWIN ferrules
Tightening torque
Screw terminal with universal head (PZ 1)
ferrules without/with plastic sleeves
TWIN ferrules
Tightening torque
Optimised for 500 Lux.
200...1200 Lux for rooms with average
furnishing level degree of reflection 0.5
max. 860 Lux in a very brightly furnished
room (reflection 0.7)
max. 3000 Lux in a very darkly furnished
room (reflection 0.2)
The Lux values are measured values on the
work surface (reference surface)
2-3 m
2.16.1 4.16.1
2 4
250/440 V AC (50/60 Hz)
16 A AC1 or 10 AX
2.6 W 5.2 W
16 A/230 V
4)
10 AX/250 V (140 µF)
8 A/230 V
100 mA/12 V
100 mA/24 V
10 A/24 V =
See table Lamp loads
6
> 3 x 10
DIN IEC 60 947-4-1
5
> 10
4
> 3 x 10
2.16.1 4.16.1
60 30
120 120
0.8 mm Ø, single core
2
0.2...2.5 mm stranded
2
0.2...4 mm solid
Without 0.25...2.5 with 0.25...4 mm
2
0.5...2.5 mm
Maximum 0.6 Nm
2
0.2...4 mm stranded, 2 x (0.2-2.5 mm
2
0.2...6 mm solid, 2 x (0.2-4 mm
Without 0.25...2.5 with 0.25...4 mm
2
0.5...2.5 mm
Maximum 0.8 Nm
3)
2
2
)
2
)
2
8