Cisco ASR 900 Series Configuration Manual page 64

Performance Monitoring Use Cases or Deployment Scenarios
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SONET/SDH Path Tables
INTERVAL
09:52-09:52
PATH 3:
Clock Source is internal
AIS = 0
LOP = 0
LOM = 0
Active Defects: None
Detected Alarms: PAIS
Asserted/Active Alarms: None
Alarm reporting enabled for: PLOP LOM B3-TCA
TCA threshold:
Rx: C2 = 00
Tx: C2 = 02
PATH TRACE BUFFER : UNSTABLE
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SONET/SDH Path Tables
INTERVAL
09:52-09:52
OC3.STS1 0/4/0 Path 1 is down.
Hardware is asr 900
Applique type is T3
Receiver is getting AIS.
Framing is C-BIT Parity
Clock Source is internal
Equipment customer loopback
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
388 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
OC3.STS1 0/4/0.2 is down.
Hardware is asr 900
Applique type is Channelized T3 to T1
Receiver is getting AIS.
Framing is Unknown
Clock Source is internal
Equipment customer loopback
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
388 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
STS-1 2, T1 1 (CT3 21) is down
Receiver is getting AIS.
Framing is unframed, Clock Source is Internal
Data in current interval (360 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
361 Unavail Secs, 0 Stuffed Secs
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x
(Cisco ASR 900 Series)
50
CV ES SES UAS
0 0 0 388
RDI = 0 REI = 0
PSE = 0 NSE = 0
PLM = 0 UNEQ = 0
B3 = 10e-6
CV ES SES UAS
0 0 0 388
Configuring SONET
................
................
BIP(B3) = 0
NEWPTR = 0
................
................
................
................