Performance Monitoring Use Cases Or Deployment Scenarios - Cisco ASR 900 Series Configuration Manual

Performance Monitoring Use Cases or Deployment Scenarios

Field
OC3.STS1 0/3/3.1 is up.
Applique type is VT1.5
STS-1 1, VTG 1, T1 1 (VT1.5 1/1/1) is down
Receiver is getting AIS.
Framing is unframed, Clock Source is Internal
Performance Monitoring Use Cases or Deployment Scenarios
You can view the statistics or error count generated on the TDM lines.
The performance monitoring result is displayed as output of the show controller sonet command.
SONET/SDH Section Tables
INTERVAL
09:52-09:52
SONET/SDH Section Tables
INTERVAL
09:52-09:52
SONET/SDH Path Tables
INTERVAL
09:52-09:52
Data in current interval (360 seconds elapsed):
Data in current interval (360 seconds elapsed):
Data in current interval (360 seconds elapsed):
The complete output for the show controller command is described as:
Router#show controllers sonet 0/4/0
SONET 0/4/0 is down.
Hardware is asr 900
Applique type is Channelized Sonet / SDH
Clock Source is Line
Medium info:
Type: Sonet, Line Coding: NRZ,
SECTION:
LOS = 1
SONET/SDH Section Tables
INTERVAL
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x
(Cisco ASR 900 Series)
48
CV ES SES
0 0 388
CV ES SES
0 0 388
CV ES SES
0 0
0 Line Code Violations, 0 P-bit Coding Violation
0 C-bit Coding Violation, 0 P-bit Err Secs
0 P-bit Severely Err Secs, 0 Severely Err Framing Secs
388 Unavailable Secs, 0 Line Errored Secs
0 C-bit Errored Secs, 0 C-bit Severely Errored Secs
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
361 Unavail Secs, 0 Stuffed Secs
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
360 Unavail Secs, 0 Stuffed Secs
Port configured rate: OC3
LOF = 0
CV ES SES
Description
Shows the status of the path.
Shows the mode of the path.
Shows the status of SPE (T1).
Shows the alarm of SPE (T1).
Shows the framing of T1 and clock of the T1.
SEFS
0
SEFS
0
UAS
0 388
BIP = 0
SEFS
Configuring SONET