Setting The Balance Weight - Dürkopp Adler 195 Service Instructions Manual

Setting the balance weight

7 Setting the balance weight
Subclasses 195-171120-01 and 195-171521-01 (part numbers 0195 990001
and 0195 990002) are equipped with a balance weight.
Cover
• Remove the arm cover ( p. 20).
Fig. 48: Setting the balance weight
①
(1) - Balance weight
To set the balance weight:
1. Lock the machine in place at position A ( p. 16).
 The hole of the pusher eccentric points up vertically.
2. Loosen the threaded pin in the hole of the balance weight (1).
3. Set the balance weight (1) vertical.
4. Tighten the threaded pin in the hole of the balance weight (1).
 The balance weight (1) is set properly.
52 Service Instructions 195 - 00.0 - 12/2017