Table of Contents
Advertisement
20.3 Setting the position of the movable blade
Fig. 101: Setting the position of the movable blade (1)
(1) - Machine housing
(3) - Cylinder
(4) - Threaded bush
To set the position of the movable blade:
1. Before you can set the right and the left position of the thread cutter
2. Open the hook covers ( p. 30).
3. Tilt the machine head ( p. 19).
Right position
4. Manually move the thread cutter to the right end position.
5. Use the fork head (7) to set the right position and secure it using the
100
WARNING
Risk of injury!
Crushing, cutting and punctures are possible.
Only set the position of the movable blade when the
machine is switched off.
①
①
manually, you need to disconnect the machine from the compressed
air system.
counternut (6).
Setting the thread cutter
(5) - Piston rod
(6) - Counternut
(7) - Fork head
Service Instructions 195 - 00.0 - 12/2017
⑦
⑥
⑤
④
③
Advertisement
Table of Contents
